There is however, no problem then: plugged -> boot -> wait -> unplug -> wait -> plug in.
On 27 nov 2012, at 13:50, mxb <[email protected]> wrote: > > Hi tech@, > > ix(4) does not detects link then cable is plugged in into already running > machine. > > ix0: > flags=28b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,NOINET6> > mtu 1500 > lladdr bc:30:5b:f3:60:10 > description: HW_EXT > priority: 0 > media: Ethernet autoselect (1000baseT full-duplex) > status: active > inet 172.16.0.232 netmask 0xfffff800 broadcast 172.16.7.255 > ix1: > flags=28b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,NOINET6> > mtu 1500 > lladdr bc:30:5b:f3:60:12 > description: HW_INT > priority: 0 > media: Ethernet autoselect > status: no carrier > inet 192.168.10.3 netmask 0xffffff00 broadcast 192.168.10.255 > > ix0 at pci1 dev 0 function 0 "Intel X540T" rev 0x01: msi > ix1 at pci1 dev 0 function 1 "Intel X540T" rev 0x01: msi > > //maxim
