X-SpamDetect-Info: ------------- Start ASpam results --------------- X-SpamDetect-Info: This message may be spam. This message BODY has been altered to show you the spam information X-SpamDetect: *******: 7.0 sd=7.0 Close nspam=0 nok=3 0.00 0.92(X-LangGuess:English) 0.87(X-NotAscii:utf) 0.85(X-Verify-SMTP present) 0.20(X-Phrase:clean) 0.20(dnswl_low) 0.70(X-myrbl:unknown) $0.50(spfpass) Sane2 7.0 X-SpamDetect-Info: ------------- End ASpam results -----------------
that should not be a problem as from memory they work on a sort of mac address of each device. the main issue you may have is if you use any form of filters on your lines or powerpoints. that also includes surge filters, I have had this problem, all filters had to be removed to make them work. cheers IC ----- Original Message ----- From: Dane Trethowan To: Techno-Chat ... Technology Enthusiasm! Sent: Tuesday, October 25, 2016 11:45 AM Subject: [Techno-Chat]: Using the power line for my home network Hi! At present I have a Wi-Fi link between my Asus RTAC3200 and an Asus RTAC68 router, the RTAC3200 being the main router and the RTAC68 as aan Access point. This arrangement seems to work very well though speed it limited to 600MBPS. I’m thinking of using some power line LAN adapters in place of the Wi-Fi arrangement as described above, TP-Link are offering a Starter Pack of 2 Adapters which are supposed to have a maximum transmission speed over the power line of 1.2GBPS. So that’s all simple enough but I am a little concerned as to the venerability of these things. For example, suppose the owner of the property next door just so happened to have some of these TP-Link adapters, could he easily gain access to my Home Network or could the adapters on his property possibly conflict with those on mine? ********** Those of a positive and enquiring frame of mind will leave the rest of the halfwits in this world behind. Checked by AVG - www.avg.com Version: 2016.0.7859 / Virus Database: 4664/13264 - Release Date: 10/24/16
