To be honest, I actually don’t know. I only have a pair, and I was wondering 
the same thing myself. I will have to do a Google search and see what comes up. 
I am sure Belkin are bound to have this in their FAQ. 
> On 11 Nov 2016, at 20:02, Dane Trethowan <[email protected]> wrote:
> 
> Hi!
> 
> I got my Power Line adapters on Tuesday I think it was and they connected 
> without a hitch, just connected one adapter to the router and to a mains 
> outlet and the other to my Ethernet Switch in the den and to a mains power 
> outlet there.
> 
> I took note of other comments made here and both adapters are not connected 
> to serge protection or any other filtering I'm aware of on the mains power 
> circuits.
> 
> So to the obvious next question, given just so well these power line adapters 
> are performing I'm planning to get some extra units and thus illiminate as 
> much reliance on my Wi-Fi network as is possible. If I get further units can 
> I just buy a separate power line adapter for each unit I wish to add to my 
> Home Network or do I have to have a pair of Power Line Adapters for every 
> additional device I add.
> 
> For example, suppose I want to add my Sangean Tabletop Internet radio on the 
> top of my fridge in the kitchen, can I just plug in a power line Adapter?
> 
> 
> 
> On 25/10/2016 9:36 PM, Chris Moore MBE wrote:
>> I use these so I can control my TIVO box via my iPhone app. For this to 
>> happen I have to connect my cable router to the back of my TIVO box. Router 
>> is upstairs and cable box is in the lounge downstairs, so they have been 
>> connected via Belkin powerline adapters instead of running ethernet cables 
>> throughout the house.
>> 
>> I have been using them for 4 years and they work flawlessly. The one 
>> downstairs is going through a surge protector and does not seem to affect 
>> performance. The signal being passed through my wires only goes as far as 
>> the fuse box, so no danger of next door picking up my feeds.
>> 
>> Chris 
>> 
>>> On 25 Oct 2016, at 05:59, Iaen Cordell <[email protected] 
>>> <mailto:[email protected]>> wrote:
>>> 
>>> yes, as do I.
>>> talk to you about it early tomorrow morning.
>>> cheers
>>> IC
>>>> ----- Original Message ----- 
>>>> From: Dane Trethowan <mailto:[email protected]>
>>>> To: [email protected] <mailto:[email protected]>
>>>> Sent: Tuesday, October 25, 2016 3:52 PM
>>>> Subject: Re: [Techno-Chat]: Using the power line for my home network
>>>> 
>>>> In my case then that would be a huge problem, I have quite a few serge 
>>>> filters in my power circuits, 
>>>> 
>>>> On 25/10/2016 3:51 PM, Iaen Cordell wrote:
>>>>> X-SpamDetect-Info: ------------- Start ASpam results ---------------
>>>>> X-SpamDetect-Info: This message may be spam. This message BODY has been 
>>>>> altered to show you the spam information 
>>>>> X-SpamDetect: *******: 7.0 sd=7.0 Close nspam=0 nok=3 0.00  
>>>>> 0.92(X-LangGuess:English) 0.87(X-NotAscii:utf) 0.85(X-Verify-SMTP 
>>>>> present) 0.20(X-Phrase:clean) 0.20(dnswl_low) 0.70(X-myrbl:unknown) 
>>>>> $0.50(spfpass) Sane2 7.0
>>>>> X-SpamDetect-Info: ------------- End ASpam results -----------------
>>>>> 
>>>>>  
>>>>> that should not be a problem as from memory they work on a sort of mac 
>>>>> address of each device.
>>>>> the main issue you may have is if you use any form of filters on your 
>>>>> lines or powerpoints.
>>>>> that also includes surge filters, I have had this problem, all filters 
>>>>> had to be removed to make them work.
>>>>> cheers
>>>>> IC
>>>>>> ----- Original Message ----- 
>>>>>> From: Dane Trethowan <mailto:[email protected]>
>>>>>> To: Techno-Chat ... Technology Enthusiasm! 
>>>>>> <mailto:[email protected]>
>>>>>> Sent: Tuesday, October 25, 2016 11:45 AM
>>>>>> Subject: [Techno-Chat]: Using the power line for my home network
>>>>>> 
>>>>>> Hi! 
>>>>>> At present I have a Wi-Fi link between my Asus RTAC3200 and an Asus 
>>>>>> RTAC68 router, the RTAC3200 being the main router and the RTAC68 as aan 
>>>>>> Access point.
>>>>>> This arrangement seems to work very well though speed it limited to 
>>>>>> 600MBPS.
>>>>>> I’m thinking of using some power line LAN adapters in place of the Wi-Fi 
>>>>>> arrangement as described above, TP-Link are offering a Starter Pack of 2 
>>>>>> Adapters which are supposed to have a maximum transmission speed over 
>>>>>> the power line of 1.2GBPS.
>>>>>> So that’s all simple enough but I am a little concerned as to the 
>>>>>> venerability of these things.
>>>>>> For example, suppose the owner of the property next door just so 
>>>>>> happened to have some of these TP-Link adapters, could he easily gain 
>>>>>> access to my Home Network or could the adapters on his property possibly 
>>>>>> conflict with those on mine?
>>>>>> 
>>>>>> **********
>>>>>> Those of a positive and enquiring frame of mind will leave the rest of 
>>>>>> the halfwits in this world behind.
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> Checked by AVG - www.avg.com <http://www.avg.com/>
>>>>>> Version: 2016.0.7859 / Virus Database: 4664/13264 - Release Date: 
>>>>>> 10/24/16
>>>> 
>>>> 
>>>> Checked by AVG - www.avg.com <http://www.avg.com/>
>>>> Version: 2016.0.7859 / Virus Database: 4664/13267 - Release Date: 10/24/16
>> 
> 
> -- 
> 
> **********
> “Oh, I’m an activist and I’m OK / I sleep all night and I tweet all day.”

Reply via email to