Sorry guys, This set started having the same problem, after running it for 1-1/2 hrs. I guess I jumped the gun. I'm going to try a new Eprom, cause when it goes bad, I can't bring up the Menu. I'll have to repost the fix later. There is still a chance the yoke is bad, but if the Eprom don't fix it, I'll run the chassis on another set, to test for bad yoke.
Later, LLW LeRoy Westlund Westlund TV & Electronics 97 North Main "At least I'll go down Centerfield, UT 84622-0087 swingin,......what a swingin Ph./Fax 435-528-3822 way to go." mailto:[EMAIL PROTECTED] -----Original Message----- From: LeRoy Westlund <[EMAIL PROTECTED]> To: ELECTRONICS PROFESSIONALS LIST <[EMAIL PROTECTED]> Date: Sunday, January 18, 2004 1:03 PM Subject: Re: [Techs] [FIXED] GE TV model 27GT613B chassis CTC177BH3Verticalproblem after 30 minutes. >Joe, and All, >Replacing the Vertical output U4501 ( OEM # 215531, TDA8172 ), fixed the >problem. >I guess I should have replace it before making a post, but it kinda threw me >a curve ball. > >Thanks to all who responded, >LLW > >LeRoy Westlund >Westlund TV & Electronics >97 North Main "At least I'll go down >Centerfield, UT 84622-0087 swingin,......what a swingin >Ph./Fax 435-528-3822 way to go." >mailto:[EMAIL PROTECTED] > >-----Original Message----- >From: Joe Tech2004 <[EMAIL PROTECTED]> >To: ELECTRONICS PROFESSIONALS LIST <[EMAIL PROTECTED]> >Date: Saturday, January 17, 2004 3:27 AM >Subject: Re: [Techs] GE TV model 27GT613B chassis CTC177BH3 Verticalproblem >after 30 minutes. > > >LeRoy, >Been awhile, but have seen, if TOP HALF stays totally unaffected, and >LOWER HALF horiz freq. way off (not just slightly). problem was >definitely yoke or fly but (memory...???) says YOKE. > >I believe that has a bonded one to boot.... >If so, you can remove it, and visually see problem area.... >(yes I have removed bonded yokes)..... > >save as last resort, but at the same time if you have experienced >removal of these yokes, it can be a relatively ez but a little timely >check.. > >My Input, Your Job... GL "joe" >================================= >[EMAIL PROTECTED] From: [EMAIL PROTECTED] (LeRoy Westlund) >Date: Sat, Jan 17, 2004, 12:19am (EST-2) To: [EMAIL PROTECTED] >Subject: [Techs] GE TV model 27GT613B chassis CTC177BH3 Vertical problem >after 30 minutes. Reply to: [EMAIL PROTECTED] (ELECTRONICS >PROFESSIONALS LIST) >Hi Members, >This CTC177BH3 chassis has a good picture for 30 minutes, then suddenly >the bottom half of the raster goes into horz. lines, and has a vertical >jitter. Lines are thicker at the top, and less thick as you progress >down to the bottom. The top half of the picture remains perfect, and is >not affected. I tried cooling the Vert IC, and associated e-caps, >etc,...but, it does not bring the picture back to normal. I have done >the tuner wrap soldering, and everything is tight. >Any suggestions are greatly appreciated. LLW >LeRoy Westlund >Westlund TV & Electronics >97 North Main >"At least I'll go down >Centerfield, UT 84622-0087 swingin,......what a swingin >Ph./Fax 435-528-3822 way >to go." >mailto:[EMAIL PROTECTED] >_________________________________________ >Please include original text when replying to this email. Once you get >your unit repaired, please post the fix to the group. Order your tech >repair CD today, Version 3.0 only $49.00-more monitor tips-user friendly >program. >[EMAIL PROTECTED] www.tech-repair.net >______ >Techs mailing list >[EMAIL PROTECTED] >http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com Go >to the link above and scroll to the bottom to enter your email address > >Joes....Electronics >(Joe:Tech/2004) >[EMAIL PROTECTED] >Fax::509-479-2283 > > >_________________________________________ >Please include original text when replying to this email. >Once you get your unit repaired, please post the fix to the group. >Order your tech repair CD today, Version 3.0 only $49.00-more monitor >tips-user friendly program. >[EMAIL PROTECTED] www.tech-repair.net >______ >Techs mailing list >[EMAIL PROTECTED] >http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com >Go to the link above and scroll to the bottom to enter your email address > > >_________________________________________ >Please include original text when replying to this email. >Once you get your unit repaired, please post the fix to the group. >Order your tech repair CD today, Version 3.0 only $49.00-more monitor >tips-user friendly program. >[EMAIL PROTECTED] www.tech-repair.net >______ >Techs mailing list >[EMAIL PROTECTED] >http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com >Go to the link above and scroll to the bottom to enter your email address _________________________________________ Please include original text when replying to this email. Once you get your unit repaired, please post the fix to the group. Order your tech repair CD today, Version 3.0 only $49.00-more monitor tips-user friendly program. [EMAIL PROTECTED] www.tech-repair.net ______ Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com Go to the link above and scroll to the bottom to enter your email address
