I have a Sharp 27US60 that is going into immediate shutdown (within 10 seconds or so, the high voltage does come up with the set) after power on. The TV can not be switched on or off again until the set has been unplugged and reset. The B+ is 126 volts and steady, the 7 and 17 volt standby sources are normal, 200 volts is good, and so is 9 volt regulator IC751. I had a new flyback on the shelf so I swapped it with no change. I can find very few tips on this model and I have checked D707, D712, and IC702 as per the 32US60 in WINSTIPS. Need some assistance on this one. I am getting bogged down with dogs as it is getting busy with lightning season if effect.
Bob Waterman, CET� #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX [EMAIL PROTECTED] [EMAIL PROTECTED] www.geminicomputertvsecurityalarms.com _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
