Yeah Bob,
You should be embarrassed, anybody would have known that..... :^) "joe"
================================

[EMAIL PROTECTED] From:
[EMAIL PROTECTED](Gemini�Computer�&�TV) Date: Fri, Jul 23,
2004, 7:12am To: [EMAIL PROTECTED] (ELECTRONICS PROFESSIONALS
LIST) Subject: Re: [Techs] Sharp 27US60 immediate shutdown Reply�to:
[EMAIL PROTECTED] (ELECTRONICS PROFESSIONALS LIST)

Never mind I found the problem. Here is the story below. I can't believe
I had not checked vertical before creating this post. I am so
embarrassed!

There was no 24 volts to pins 3 and 6 of vertical IC (IC501 - LA7841).
Traced source back to D502 which checked okay. When checking the
continuity path between pin 7 of the flyback to the anode of D502, there
was none. Problem ended up being that there is a solder rivet
surrounding pin 7 which really needs a good "blob" of solder to ensure
good continuity. This corrected the set.

Bob Waterman, CET� #RI-28
Master Technician License #9109
Service Manager / Parts Manager
Gemini Computer, TV, & Security Alarms
(508)695-7302
(508)695-7769 FAX
[EMAIL PROTECTED]
[EMAIL PROTECTED]
www.geminicomputertvsecurityalarms.com

----- Original Message -----
From: "Gemini Computer & TV" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, July 23, 2004 6:34 AM
Subject: [Techs] Sharp 27US60 immediate shutdown

I have a Sharp 27US60 that is going into immediate shutdown (within 10
seconds or so, the high voltage does come up with the set) after power
on. The TV can not be switched on or off again until the set has been
unplugged and reset. The B+ is 126 volts and steady, the 7 and 17 volt
standby sources are normal, 200 volts is good, and so is 9 volt
regulator IC751. I had a new flyback on the shelf so I swapped it with
no change. I can find very few tips on this model and I have checked
D707, D712, and IC702 as per the 32US60 in WINSTIPS. Need some
assistance on this one. I am getting bogged down with dogs as it is
getting busy with lightning season if effect.

Bob Waterman, CET� #RI-28
Master Technician License #9109
Service Manager / Parts Manager
Gemini Computer, TV, & Security Alarms
(508)695-7302
(508)695-7769 FAX
[EMAIL PROTECTED]
[EMAIL PROTECTED]
www.geminicomputertvsecurityalarms.com
______________________________________________
Tech Repair CD...order your just $49.00 plus shipping...One year of
updates free.
www.intrepid-video.com www.tech-repair.net Techs mailing list
[EMAIL PROTECTED]
http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
______________________________________________
Tech Repair CD...order your just $49.00 plus shipping...One year of
updates free. www.intrepid-video.com www.tech-repair.net
Techs mailing list
[EMAIL PROTECTED]
http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com

Joes....Electronics
�(Joe:Tech/2004)
[EMAIL PROTECTED]
Fax::509-479-2283


_______________________________________________
Tech Repair CD...order your just $49.00 plus shipping...One year of updates free.
www.intrepid-video.com www.tech-repair.net
Techs mailing list
[EMAIL PROTECTED]
http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com

Reply via email to