I have only 2 x 8000's but no problems with them. NAT Mode enabled ?
MGT and Data Interface Combined ?
You sure he has the proper default route on the connected device ?
Where does Tracert take him to from the LAN Side ?
--
Ian Fraser
goZoom.ca Inc.
195 Libby's Rd. McNab-Braeside
K7S0E1
877(613) 622 0093 ext 21
On 13/09/2016 12:03 AM, Matthew Carpenter wrote:
So anybody able to get a CPE8000 to move data?
I submitted a ticket, but thought I would ask here also.
SINR of 28 (Where did the CINR value go we had on the 7000?)
Also only shows 1 chain now. Combined I am guessing?
I get my IP address attached to the SIM card. I am able to ping out to
google, and I can ping from the Datacenter back to the UE.
iperf will perform a upload, then crash. No download is performed. I
tried iperf version 1 and 2.
The employee with the UE said no LAN traffic.
The only thing I see odd is that is lists its IP address on the WAN,
the subnet as 255.255.255.255 and the Default Gateway a (blank).
The old CPE7000 had the same IP address (same SIM card), the
255.255.255.0 and a Default GW of 192.168.91.1 (all correct).
When Telrad comes back on the answer I will let you all know. I was
really hoping it would be a "Plug in SIM, power it up, connected, surf
the web, much rejoicing!" Oh and SINR went from 25 to 28.
Thanks!
--
*Matthew Carpenter*
*806-316-5071 office*
*806-236-9558 cell*
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
