On Fri, Sep 30, 2016 at 12:27 PM, Matthew Carpenter < [email protected]> wrote:
> The built in iperf is not working 100%, so its hard for me to give exact > numbers. That number is coming from my installers during install. First thoughts: •UE8000 has a much faster processor •built-in iperf ui does seem unworkable; •has anyone successfully used ssh into it? default or set credentials don't seem to work •there appears to be an 11-character limit on the admin password, or else some filtering going on (disallowed special characters) •are you using SINR or CQI as your aiming target? CQI being downstream modulation achieved, apparently 20 mhz, SF 2 SSF 1 I'm getting ~4.5 Mbps up with a CQI of 11 and RSRQ of -6 on a sector in use (12 UEs) 8 TCP streams (iperf3 on a DMZ client) I'm getting only 8 Mbps down whether I use UDP or TCP, oddly… but this is on a *very* badly mounted test location, so I wouldn't read much into it. 7 Mbps was about the best I'd get from a UE7000 at this spot. -- Jeremy Austin (907) 895-2311 (907) 803-5422 [email protected] Heritage NetWorks Whitestone Power & Communications Vertical Broadband, LLC Schedule a meeting: http://doodle.com/jermudgeon
_______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
