We have recently noticed a new problem: we have an access port on our BreezeWay (in this case, so happens it's the BW's port 10, but may not be relevant) that is plugged into a MikroTik CCR 1036. The MikroTik is reporting that it is sporadically seeing FCS errors on frames received from the BreezeWay. I have replaced the ethernet cable and also tried moving to a different ethernet port on the CCR. Neither has made a difference.
I'm wondering if there is any way I can see any ethernet stats or diagnostic information from the BreezeWay's perspective. In my poking around, so far I have come up empty. I'm not necessarily convinced at this point that this is the BreezeWay's fault, mind you. I'm just wondering if anybody else has seen something similar, and how to best go about chasing this problem down. My perception is that the CCRs in particular have had a troubled history when it comes to its copper gig ports...search for "Ubiquiti AirFiber MikroTik CCR" if you want some fun afternoon light reading. Thanks, -- Nathan Anderson First Step Internet, LLC [email protected] _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
