We also have the Breezeway connected to a CCR 1036. I'm not seeing FCS errors.
Breezeway port 9 connected to CCR ether4. The CCR ethernet port is all at default settings. Breezeway SW version 0606.02151 RouterOS 6.32.3 ------ Original Message ------ From: "Nathan Anderson" <[email protected]> To: "[email protected]" <[email protected]> Sent: 1/30/2017 2:37:27 AM Subject: [Telrad] Ethernet RX FCS errors from BreezeWay? >We have recently noticed a new problem: we have an access port on our >BreezeWay (in this case, so happens it's the BW's port 10, but may not >be relevant) that is plugged into a MikroTik CCR 1036. The MikroTik is >reporting that it is sporadically seeing FCS errors on frames received >from the BreezeWay. I have replaced the ethernet cable and also tried >moving to a different ethernet port on the CCR. Neither has made a >difference. > >I'm wondering if there is any way I can see any ethernet stats or >diagnostic information from the BreezeWay's perspective. In my poking >around, so far I have come up empty. > >I'm not necessarily convinced at this point that this is the >BreezeWay's fault, mind you. I'm just wondering if anybody else has >seen something similar, and how to best go about chasing this problem >down. My perception is that the CCRs in particular have had a troubled >history when it comes to its copper gig ports...search for "Ubiquiti >AirFiber MikroTik CCR" if you want some fun afternoon light reading. > >Thanks, > >-- >Nathan Anderson >First Step Internet, LLC >[email protected] > >_______________________________________________ >Telrad mailing list >[email protected] >http://lists.wispa.org/mailman/listinfo/telrad > _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
