In ihss, there is a field that says which EPC your UE is attached to. For our 8ks, they weren't showing up as active. Our 7ks were listed though. I was asked if our NTP was set, and upon investigation found that the time was using the wrong time zone, even though it was correctly set as -6 in our case. NTP was functional otherwise on the EPC.
The radios are active and working. It was just a visual bug of some sort. An upgrade to the latest version of BV fixed it. Although the time zone issue is still active at R&D it seems. I use BV for most tasks currently as I'm not that familiar with the cli's. Although it seems I need to be to get much troubleshooting done with this gear LOL. Thanks, Tristan Johnson Owner www.wirelessdatanet.net 309-893-4152 ------ Original Message ------ From: "Nathan Anderson" <[email protected]> To: "[email protected]" <[email protected]>; "'Tristan Johnson'" <[email protected]> Sent: 4/14/2017 1:56:06 AM Subject: RE: [Telrad] ihss not showing connected epc
...oh, and also, I should mention that 'time-zone-offset-from-utc' is a static value and does not, sadly, take DST in your particular timezone into account. So for part of the year, unless you stay on top of DST and change (...and reboot...) the EPC, you will be an hour off. -- Nathan From:[email protected] [mailto:[email protected]] On Behalf Of Nathan Anderson Sent: Thursday, April 13, 2017 11:52 PM To: 'Tristan Johnson'; [email protected] Subject: Re: [Telrad] ihss not showing connected epc Where exactly are you looking where you are not seeing 8Ks show up? 'show ue-info' is the only thing I'm aware of that is authoritative with respect to currently attached UEs. We use RADIUS instead of iHSS, however, so perhaps there is something available to iHSS users that I am not familiar with. As far as timestamps go, do you have 'timing time-zone-offset-from-utc' configured on the EPC? If you do, then UE 'attached date' will be correctly offset from UTC per your specification, as will 'ReportedDateTime' for any log entries in 'show notification stream alarms' (though 'eventTime' will still be in UTC). Even tlsyslog entries will be correctly stamped. Although I haven't tested this, as with everything else, I imagine that if you need to set or change 'time-zone-offset-from-utc', that change will not take effect until after an EPC reboot. -- Nathan From:[email protected] [mailto:[email protected]] On Behalf Of Tristan Johnson Sent: Wednesday, April 12, 2017 8:42 AM To:[email protected] Subject: [Telrad] ihss not showing connected epc Is anyone else not seeing radios showing up as connected to their EPC in ihss? It seems my 8ks aren't showing up, and also my epc doesn't seem to want to have the proper time on it. It doesn't seem to want to adjust to the time offset. The time is right except for the hour being way off. It's "stuck" at UTC it seems. I do have a ticket open, just curious if anyone is seeing the same. Thanks, Tristan Johnson Owner http://wirelessdatanet.net 309-893-4152 Virus-free. www.avast.com
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
_______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
