In MixW you can store frequencies and modes using OPTIONS/MEMORY... 20 I think. Rich k2tft
In [EMAIL PROTECTED], "Andrew J. O'Brien" <[EMAIL PROTECTED]> wrote: > > > ----- Original Message ----- > From: "Jerry" <[EMAIL PROTECTED]> > ! > > > > Andy, > > > > OK I guess if one likes virtual radio displays. To me seems like a > > "waste" of computer memory and CPU use, where the decoding screen is > > going to be displayed most of the time. > > Good point Jerry. I was thinking that HRD is really useful for storing > favorite frequencies and switching rig settings. I guess that is one gets > more familiar with MixW's ability in this regard, HRD may not be that > necessary. If you look at the MixW macros for FREQ Control, there are many > I have never tried, anybody here an expert on MixW frequency control ? > > > Frequency Control Macros > > <FQ:fq_in_kHz> - Sets the transceiver frequency > <ZFQ:fq_in_kHz> - Sets the tranceiver zero-beat frequency > <AUDIOFQ:fq_in_Hz> - Sets the audio frequency > <JUMPTOTXFQ> - RX frequency jumps to TX frequency > <ALIGN:fq_in_Hz> aligns to the specified frequency > <SPZOOM:n> set spectrum or waterfall zoom (0.5, 1, 2, 3, or 4 are available) > <SPSHIFT:fq_in_Hz> sets the spetrum or waterfall shift. > <BOOKMARK> - Toggle the bookmark on/off > <BMERASE> -clears all marks on this frequency > <CATCMD:text_command> - sends the text to the transceiver. > <CATCMDHEX:hex_command> - sends the hex command to the transceiver. > (This can be in 0A 3F 56 08 or 0A3F5608 formats) > <CATWAIT:ms> - CAT delay in ms. > <CATCMDDDE:text_command> - sends text via DDE > --------------------------------- > <MEMW:n> and > <MEMR:n> > These macros are equivalent to Ctrl+n and Alt+n > and can be used to save and restore current frequency and mode > ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/ELTolB/TM --------------------------------------------------------------------~-> Need a Digital Mode QSO? Connect to telnet://208.15.25.196/ For general discussion on digital modes, try our sister relector at http://groups.yahoo.com/group/digitalradio Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/themixwgroup/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
