Well, whaddyknow, so you can, slick..even stores mode and CW parameters! Andy K3UK
----- Original Message ----- From: "rich" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, November 13, 2005 7:29 PM Subject: [MixW Multimode] Re: MixW and frequency control > In MixW you can store frequencies and modes using OPTIONS/MEMORY... > 20 I think. > Rich k2tft > > > > > > > > > > > > > > In [EMAIL PROTECTED], "Andrew J. O'Brien" <[EMAIL PROTECTED]> > wrote: >> >> >> ----- Original Message ----- >> From: "Jerry" <[EMAIL PROTECTED]> >> ! >> >> >> > Andy, >> > >> > OK I guess if one likes virtual radio displays. To me seems > like a >> > "waste" of computer memory and CPU use, where the decoding > screen is >> > going to be displayed most of the time. >> >> Good point Jerry. I was thinking that HRD is really useful for > storing >> favorite frequencies and switching rig settings. I guess that is > one gets >> more familiar with MixW's ability in this regard, HRD may not be > that >> necessary. If you look at the MixW macros for FREQ Control, there > are many >> I have never tried, anybody here an expert on MixW frequency > control ? >> >> >> Frequency Control Macros >> >> <FQ:fq_in_kHz> - Sets the transceiver frequency >> <ZFQ:fq_in_kHz> - Sets the tranceiver zero-beat frequency >> <AUDIOFQ:fq_in_Hz> - Sets the audio frequency >> <JUMPTOTXFQ> - RX frequency jumps to TX frequency >> <ALIGN:fq_in_Hz> aligns to the specified frequency >> <SPZOOM:n> set spectrum or waterfall zoom (0.5, 1, 2, 3, or 4 are > available) >> <SPSHIFT:fq_in_Hz> sets the spetrum or waterfall shift. >> <BOOKMARK> - Toggle the bookmark on/off >> <BMERASE> -clears all marks on this frequency >> <CATCMD:text_command> - sends the text to the transceiver. >> <CATCMDHEX:hex_command> - sends the hex command to the transceiver. >> (This can be in 0A 3F 56 08 or 0A3F5608 formats) >> <CATWAIT:ms> - CAT delay in ms. >> <CATCMDDDE:text_command> - sends text via DDE >> --------------------------------- >> <MEMW:n> and >> <MEMR:n> >> These macros are equivalent to Ctrl+n and Alt+n >> and can be used to save and restore current frequency and mode >> > > > > > > > > Need a Digital Mode QSO? Connect to telnet://208.15.25.196/ > > For general discussion on digital modes, try our sister relector at > http://groups.yahoo.com/group/digitalradio > Yahoo! Groups Links > > > > > > > > ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/ELTolB/TM --------------------------------------------------------------------~-> Need a Digital Mode QSO? Connect to telnet://208.15.25.196/ For general discussion on digital modes, try our sister relector at http://groups.yahoo.com/group/digitalradio Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/themixwgroup/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
