+++ Martin Budaj [04-12-26 13:06 +0100]: >>> > I'm getting the hang of this and have drawn up some cave. It went OK until >>> > I got to a complicated section, with an underlying streamway adn overlying >>> > passages. The streamway needs to be a separate scrap. But I haven't got >>> > that far. One bit of wall wasn't shown. By adding a map-fg colour I could >>> > see that therion is very confused about what is the inside and what is the >>> > outside of the scrap. > >> >> Only minor improvements were required -- mostly to correct line types (the >> hidden wall was actually a border, the inner pillar should have -outline >> in option...). All my changes are marked red in the enclosed picture.
Now that I've drawn about 8km of survey the last scrap (top right hand corner - scrap bmb3_s3) has had 'pillar failure' again. There are 3 pillars which do not work (the insides are filled). They are all walls with -outline in and I've tried reversing them, but it seems to stay broken. What's going on? The files are are: Big version with the scans in (16Mb): http://trilogy-gw.aleph1.co.uk/~wookey/files/bluemoon1.tgz Small version without the scans: http://trilogy-gw.aleph1.co.uk/~wookey/files/bluemoon.tgz Wookey -- Aleph One Ltd, Bottisham, CAMBRIDGE, CB5 9BA, UK Tel +44 (0) 1223 811679 work: http://www.aleph1.co.uk/ play: http://www.chaos.org.uk/~wookey/
