That is a bit problem, because Therion is not able in any way to calculate
correct vertical position of scraps. It is theoretically impossible.
Correct way could be to define another map from scraps which are above and
other map from scraps which a below:
map all.map -projection plan
above.map
break
below.map
endmap
You may define as many different maps as you need in your project and select
the proper one in the thconfig.
m.s.
On Apr 26, 2017, at 04:07 PM, Philippe Vernant <[email protected]> wrote:
Thanks guys, I’m just using the automatic color set up for map as suggested by
Martin.
Now I have another question. I have a file like that:
map map1 -projection plan
scrap1
scrap2
scrap3
endmap
map map2 -projection plan
scrap4
scrap5
scrap6
endmap
On the plot with map1 et map2 the map2 scraps that should be blow the scraps of
map1 are above. Do I have to look for something wrong in my scraps, or is it
that therion compute an average altitude for map1 and map2 and lay all the
scraps based on this average elevation rather that the average elevation of
each scraps ?
Thanks,
Phil
On 26 Apr 2017, at 9:10 AM, Martin Sluka via Therion <[email protected]> wrote:
26. 4. 2017 v 2:08, Olly Betts via Therion <[email protected]>:
Removed map colour option. It should be defined in layout, not source files.
But it doesn’t allow to choose color for particular map!
Martin
_______________________________________________
Therion mailing list
[email protected]
https://mailman.speleo.sk/listinfo/therion
_______________________________________________
Therion mailing list
[email protected]
https://mailman.speleo.sk/listinfo/therion
