The easiest thing that would be causing this is not having the settings save properly in Bob. When you stop and restart Bob one of the lines in the terminal should say Serving on 0.0.0.0:8080 (or which every port it is using), if it says 127.0.0.1:8080 instead than the settings aren't saving correctly.
If that happens than go to the Manual Settings tab under the Bob Setting control panel tab and make sure that in the ws-server section it has the host set to 0.0.0.0 and then click the update settings button. It should say Wrote settings file in the terminal. If that is all working correctly than it is probably a network settings problem outside of Bob and Tony's suggestion is the way to go. There may also be some setting on your router that could cause trouble but I have never run into that problem so it is just a guess. And as a note, the problem with the incorrect port being shown should be fixed. Even if it isn't the port that you use to access Bob on the computer running it is the same as the port you use on anything else on the network so you don't have to just blindly try ports and hope. -- You received this message because you are subscribed to the Google Groups "TiddlyWiki" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/tiddlywiki. To view this discussion on the web visit https://groups.google.com/d/msgid/tiddlywiki/44f78bd2-efa2-45b2-bac3-919f3e48382e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
