Can you clarify which RPM you are referring to? The nightly page has
pre-built el6 RPMs and SRPM for the latest pre-release. Have you tried
those yet?
-brian
On Thu, Jun 27, 2013 at 3:48 PM, Don M <dmj_1...@yahoo.com> wrote:
> Thanks for the quick reply.
> I have been trying to rebuild using the tigervnc source RPM with the
> xorg-x11-server-source RPM also installed.
> I am following the instructions from the BUILDING.txt file, but I continue
> to get the following error
> configure.ac:35: error: must install xorg-macros 1.10 or later before
> running autoconf/autogen
>
> Thanks
> Don
>
>
> ------------------------------
> *From:* Brian Hinz <bph...@users.sourceforge.net>
> *To:* Don M <dmj_1...@yahoo.com>
> *Cc:* "tigervnc-users@lists.sourceforge.net" <
> tigervnc-users@lists.sourceforge.net>
> *Sent:* Thursday, June 27, 2013 2:28 PM
>
> *Subject:* Re: [Tigervnc-users] libvnc.so module not working well in RHEL
> 6.2
>
> Do you mean that the Xorg module from the EL6 x86_64 RPMs from the nightly
> build page does not load? I have not tested the Xorg module myself... If
> it's because the build was created with a newer version of Xorg, then you
> might simply be able to rebuild the source RPM.
>
> -brian
>
> On Thu, Jun 27, 2013 at 2:07 PM, Don M <dmj_1...@yahoo.com> wrote:
>
> I agree one of the newer pre-releases would work better.
> But, I they don't work out of the box in the setup I need.
> The system that we are connecting to, the OS is already set.
> With the Xorg being version 1.10.4
> 1.0.90, is the tigervnc-server-module that ships with RHEL 6.2 64 bit
> which contains that Xorg.
> If I use a new libvnc.so module, the module does not load.
>
> ------------------------------
> *From:* Brian Hinz <bph...@users.sourceforge.net>
> *To:* Don M <dmj_1...@yahoo.com>
> *Cc:* "tigervnc-users@lists.sourceforge.net" <
> tigervnc-users@lists.sourceforge.net>
> *Sent:* Tuesday, June 25, 2013 9:47 PM
> *Subject:* Re: [Tigervnc-users] libvnc.so module not working well in RHEL
> 6.2
>
> 1.0.90 is pretty old, perhaps one of the new pre-release builds will work
> better:
>
> http://tigervnc.sourceforge.net/tiger.nightly/
>
> -brian
>
> On Tue, Jun 25, 2013 at 10:35 AM, Don M <dmj_1...@yahoo.com> wrote:
>
> Using the following module
>
> tigervnc-server-module-1.0.90-0.17.20110314svn4359.el6.x86_64
>
> on RHEL 6.2 64 bit system, when the xorg file is modified to use the vnc
> module.
>
> Then connect a VNC Viewer to the display. The display gets very sluggish.
>
> It begins to take up to 30 seconds for mouse clicks to go through.
>
> If you look at top, the CPU is spinning up to 100%.
>
> What are my options, I really need to be able to connect to this system
>
> using the xorg's vnc module?
>
>
> Thanks
>
> Don
>
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Tigervnc-users mailing list
> Tigervnc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/tigervnc-users
>
>
>
>
>
>
>
>
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Tigervnc-users mailing list
Tigervnc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/tigervnc-users
