>From the tiger.nightly directory, I am using the SRPM, following the
>BUILDING.txt instructions
________________________________
From: Brian Hinz <bph...@users.sourceforge.net>
To: Don M <dmj_1...@yahoo.com>
Cc: "tigervnc-users@lists.sourceforge.net"
<tigervnc-users@lists.sourceforge.net>
Sent: Thursday, June 27, 2013 4:24 PM
Subject: Re: [Tigervnc-users] libvnc.so module not working well in RHEL 6.2
Can you clarify which RPM you are referring to? The nightly page has pre-built
el6 RPMs and SRPM for the latest pre-release. Have you tried those yet?
-brian
On Thu, Jun 27, 2013 at 3:48 PM, Don M <dmj_1...@yahoo.com> wrote:
Thanks for the quick reply.
>I have been trying to rebuild using the tigervnc source RPM with the
>xorg-x11-server-source RPM also installed.
>I am following the instructions from the BUILDING.txt file, but I continue
>to get the following error
>configure.ac:35: error: must install xorg-macros 1.10 or later before running
>autoconf/autogen
>
>Thanks
>Don
>
>
>
>
>
>
>________________________________
> From: Brian Hinz <bph...@users.sourceforge.net>
>To: Don M <dmj_1...@yahoo.com>
>Cc: "tigervnc-users@lists.sourceforge.net"
><tigervnc-users@lists.sourceforge.net>
>Sent: Thursday, June 27, 2013 2:28 PM
>
>Subject: Re: [Tigervnc-users] libvnc.so module not working well in RHEL 6.2
>
>
>
>Do you mean that the Xorg module from the EL6 x86_64 RPMs from the nightly
>build page does not load? I have not tested the Xorg module myself... If
>it's because the build was created with a newer version of Xorg, then you
>might simply be able to rebuild the source RPM.
>
>-brian
>
>
>On Thu, Jun 27, 2013 at 2:07 PM, Don M <dmj_1...@yahoo.com> wrote:
>
>I agree one of the newer pre-releases would work better.
>>But, I they don't work out of the box in the setup I need.
>>The system that we are connecting to, the OS is already set.
>>With the Xorg being version 1.10.4
>>1.0.90, is the tigervnc-server-module that ships with RHEL 6.2 64 bit
>>which contains that Xorg.
>>If I use a new libvnc.so module, the module does not load.
>>
>>
>>
>>________________________________
>> From: Brian Hinz <bph...@users.sourceforge.net>
>>To: Don M <dmj_1...@yahoo.com>
>>Cc: "tigervnc-users@lists.sourceforge.net"
>><tigervnc-users@lists.sourceforge.net>
>>Sent: Tuesday, June 25, 2013 9:47 PM
>>Subject: Re: [Tigervnc-users] libvnc.so module not working well in RHEL 6.2
>>
>>
>>
>>1.0.90 is pretty old, perhaps one of the new pre-release builds will work
>>better:
>>
>>
>>http://tigervnc.sourceforge.net/tiger.nightly/
>>
>>
>>-brian
>>
>>
>>On Tue, Jun 25, 2013 at 10:35 AM, Don M <dmj_1...@yahoo.com> wrote:
>>
>>Using the following module
>>>tigervnc-server-module-1.0.90-0.17.20110314svn4359.el6.x86_64
>>>on RHEL 6.2 64 bit system, when the xorg file is modified to use the vnc
>>>module.
>>>
>>>Then connect a VNC Viewer to the display. The display gets very sluggish.
>>>It begins to take up to 30 seconds for mouse clicks to go through.
>>>If you look at top, the CPU is spinning up to 100%.
>>>What are my options, I really need to be able to connect to this system
>>>using the xorg's vnc module?
>>>
>>>
>>>ThanksDon
>>>------------------------------------------------------------------------------
>>>This SF.net email is sponsored by Windows:
>>>
>>>Build for Windows Store.
>>>
>>>http://p.sf.net/sfu/windows-dev2dev
>>>_______________________________________________
>>>Tigervnc-users mailing list
>>>Tigervnc-users@lists.sourceforge.net
>>>https://lists.sourceforge.net/lists/listinfo/tigervnc-users
>>>
>>>
>>
>>
>>
>
>
>
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Tigervnc-users mailing list
Tigervnc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/tigervnc-users
