On 9/20/05, Rex <[EMAIL PROTECTED]> wrote: > On Tue, 20 Sep 2005 00:17:36 -0500, James Meek <[EMAIL PROTECTED]> > wrote: > > >Hmmmm. I must have found by ohmmeter the connection between the eeprom > >and the rubidium via J2-14A, not realizing they were both inputs (as I had > >concluded that the pinout was non-standard). I not sure about what I > >found out about the connection of the rubidium serial output, but I seen > >to recall that it doesn't just end electrically where it does visually, > >but > >rather "goes underground" through the inner layers of the board and > >surfaces > >elsewhere in the circuitry. > > I'm sorry. It's late and I don't really understand that. Please tell me > what you have found connected by underground circuits or (possibly) by > circuits that I have missed. > > I'm just trying to help here, and I _AM_ the person that figured out > that the rubidium box needs 5 V. You could still be stumbling trying to > figure why there is no output. > > Please be specific with any new knowledge or criticism of my help. > > P.S. Have you tried to power it up with the info I just gave you. > > Give me some *facts* with new information or shut up. You are beginning > to annoy me. > > And **** you very much for not thanking me in the previous message. > > > > _______________________________________________ > time-nuts mailing list > [email protected] > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >
_______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
