Bjorn, When I was working with Motorola receivers the standard software was GrafNav from Waypoint consulting. They were purchased by Novatel a couple of years ago so I don't know the status of these old products.
http://www.novatel.com/products/waypoint_grafnav.htm Best regards, Randy Warner Senior Applications Engineer Geodetics, Inc. 858.729.0872 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Björn Gabrielsson Sent: Wednesday, July 18, 2007 2:24 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Oncore VP problem ); SAEximRunCond expanded to false Errors-To: time-nuts-bounces+randy Jason, This translator should get you into rinex. http://www.helenav.nl/rinex.htm When there you have all post processing packages out there to work between base VP and rover VP, VP vs your local CORS, VP vs your other GPS, etc. If you find something more generic than DOS excecutable - let me know! -- Björn On Wed, July 18, 2007 23:01, Jason Rabel said: > Bjorn, > > Is there any software available (free / trial / pay) that makes use of the > carrier phase data from the VP? If so, could you shoot me some URLs! > > Jason > > >> In some ways the VP which has optional phase outputs IS a higher-end >> receiver than the newer oncore receivers lacking that option. ;-) > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
