); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] I have a copy of GrafNav/GrafNet. If you need to process some data, let me know.
Please do not send email asking for a copy of the software program - it was very expensive and it only works with a dongle ! Brian Kirby Randy Warner wrote: > ); SAEximRunCond expanded to false > Errors-To: [EMAIL PROTECTED] > X-Spam: [F=0790697674; S=0.010(2007071801); MH=0.850(2007071834); > R=0.600(s0/n0)] > X-MAIL-FROM: <[EMAIL PROTECTED]> > X-SOURCE-IP: [(unknown)] > X-MxL-Spam-Verdict: No > > Bjorn, > > When I was working with Motorola receivers the standard software was GrafNav > from Waypoint consulting. They were purchased by Novatel a couple of years > ago so I don't know the status of these old products. > > http://www.novatel.com/products/waypoint_grafnav.htm > > > Best regards, > > Randy Warner > Senior Applications Engineer > Geodetics, Inc. > 858.729.0872 > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Björn Gabrielsson > Sent: Wednesday, July 18, 2007 2:24 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Oncore VP problem > > ); SAEximRunCond expanded to false > Errors-To: time-nuts-bounces+randy > Jason, > > This translator should get you into rinex. > > http://www.helenav.nl/rinex.htm > > When there you have all post processing packages out there to work between > base VP and rover VP, VP vs your local CORS, VP vs your other GPS, etc. > > If you find something more generic than DOS excecutable - let me know! > > -- > Björn > > On Wed, July 18, 2007 23:01, Jason Rabel said: >> Bjorn, >> >> Is there any software available (free / trial / pay) that makes use of the >> carrier phase data from the VP? If so, could you shoot me some URLs! >> >> Jason >> >> >>> In some ways the VP which has optional phase outputs IS a higher-end >>> receiver than the newer oncore receivers lacking that option. ;-) >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
