I got a chance to look at the bios today and saw no features that would change the cpu speed as some type of power save feature. I did discover that Seti doesn't start processing for a little while after a restart so I had to switch my imperfect solution to my offset problems to use [EMAIL PROTECTED]
On 1/4/08, Ryan <[EMAIL PROTECTED]> wrote: > I had an interesting result. I downloaded RMclock and with [EMAIL PROTECTED] > running the CPU was at full load and speed. I stopped Seti and the > load dropped to almost nothing but the speed stayed the same. After > about a minute the offset and jitter readings went through the roof. > My offsets were above half a second! There was no reduction in > anything CPU related while this happened. When I get access to the > machine I'll take a look at the bios settings to make sure I have the > power settings in an optimal configuration. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
