the bios lists them as power saving or "green" features. they will not reference speed directly. try disabling anything that remotely implies power saving. The best solution I know of though is to use linux as an ntp server and set a fixed processor speed directly.
-Eric On 1/5/08, Ryan <[EMAIL PROTECTED]> wrote: > > I got a chance to look at the bios today and saw no features that > would change the cpu speed as some type of power save feature. I did > discover that Seti doesn't start processing for a little while after a > restart so I had to switch my imperfect solution to my offset problems > to use [EMAIL PROTECTED] > > On 1/4/08, Ryan <[EMAIL PROTECTED]> wrote: > > I had an interesting result. I downloaded RMclock and with [EMAIL PROTECTED] > > running the CPU was at full load and speed. I stopped Seti and the > > load dropped to almost nothing but the speed stayed the same. After > > about a minute the offset and jitter readings went through the roof. > > My offsets were above half a second! There was no reduction in > > anything CPU related while this happened. When I get access to the > > machine I'll take a look at the bios settings to make sure I have the > > power settings in an optimal configuration. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
