Hi Randy: Those appear to be the very common 14 pin dip IC oscillators. pin 7 = ground pin 14 = Vdd pin 8 = Out pin 1 may be no connection or may be inhibit. Check with DMM in Ohm and diode function.
It sure looks like: http://www.valpeyfisher.com/images/productshots/xo/vf150.jpg Have Fun, Brooke Clarke http://www.prc68.com/P/Prod.html Products I make and sell http://www.prc68.com/Alpha.shtml All my web pages listed based on html name http://www.PRC68.com http://www.precisionclock.com http://www.prc68.com/I/WebCam2.shtml 24/7 Sky-Weather-Astronomy Web Cam Randy Leifer wrote: > Novice here. > I have a small electronics lab at home. > > PART 1: > I have these Valpey Fisher VF154 1 MHz oscillators. > I could not find any details at the VF website on this > particular model #. (OC, VC, ???) > Picture/link below.... > > PART 2: > Does anyone have a link to a simple circuit, where I > could use these to get a stand-alone signal @ around 1 > or 2 volts? > This is just an educational value/exercise for me, I > don't really have an intended use (yet) for these. > I have some high-speed opamps and buffers....? > > Thanks, > =Randy Leifer= > > > http://i5.photobucket.com/albums/y177/Midiot/DSCN3333.jpg > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
