Skip, I'm truly sorry but you have discovered the ultimate "Black Hole" of timing information.
had, K7MLR At 02:15 PM 9/24/2008, you wrote: >Hello time-nuts, > >I have recently acquired a Datum TS2100-IRIG NTP time server. Nice >unit, and I do have IRIG-B to feed it, however, reading the manual I >notice that there is a GPS version as well. Upon taking the top of the >unit off I notice that there are the connector and standoffs for both Oncore >and Trimble ACE-III sized receivers. Tried plugging both in, but the unit >does not >seem to recognize it (always reports GPS receiver busy). > >I tried calling Symmetricom (talked to Larry Dearing) but seem to be >caught in a Catch 22. They will not release the information on how to >make the change, and will not do it themselves since the product has >been obsoleted. > >Anyone have a sympathetic contact at Symmetricom? > >Does anyone have a TS2100-GPS that they wouldn't mind taking the top off >and spending a few minutes on the phone (303-790-1830 8am-5pm M-F)? There >does appear to be some jumpers on the board, and there are also words in >EEPROM that can be modified via terminal interface. > >Also notice that there is an LPRO rubidium option for these units. I >have one of these too and would be interested in trying to upgrade to >rubidium as well. Anyone with one of these units out there? > >Thanks in advance for any help or direction in finding answers to these >questions. > >Skip Withrow > > >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
