Looking more closely at the software list, I don't see the utility that I use. Whatever it is, it's a DOS based thing or is at least a shell ap with just text. I'll dig up the zip file at work when I'm in the office over the weekend and get it over to you if I still have it. I've used it successfully to configure both ports to dump NMEA with varying output strings.
-Bob On Fri, Oct 10, 2008 at 8:36 PM, Morris Odell <[EMAIL PROTECTED]>wrote: > Hi all, > > I'm using a Trimble Lassen IQ receiver for a Shera style GPSDO. That part > works OK but I would also like to get serial data from the receiver's > output > port #2. > > The receiver seems to respond to commands sent to port #1 but the desired > outputs don't seem to appear. > > Specifically I want to get two NMEA messages, GGA and ZDA, or alternatively > the TAIP TM timing message. No matter how I instruct the receiver I don't > see two NMEA messages, just the first one on the list I've sent to the > receiver. The TAIP doen't seem to work at all. > > Am I missing something here? Has anyone had any success with this device? > > Thanks, > > Morris > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
