Ok, I will try this from a different angle.
1" - 14TPI UNS thread like you described are very rare outside
of the large machine industry. They are used for things
like bolts on tractors. I have a pretty big doubt that it
has any application in a GPS antenna.
US pipe thread in the sizes 1/2", 3/4", and 1" are 14TPI, they
are not "1.0 inch" in any dimension, however.
It is pretty common to use standard pipe fittings in antenna
work.
So how did you arrive at needing a 1"-14TPI UNS die?
-Chuck Harris
David C. Partridge wrote:
Panasonic VIC-100 GPS antenna ...
Dave
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Chuck Harris
Sent: 07 July 2009 13:07
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] 1" 14 tpi UNS die
I don't recognize the size you are asking for. What is your application?
-Chuck Harris
David C. Partridge wrote:
Does anyone (preferably in the UK) have 1.0-14UNS-2A thread cutting
die they would be prepared to lend me (preferably a die nut type as I
don't have a die stock)?
Thanks
David Partridge
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
