I tried a 3/4" BSP but that didn't quite fit. NPT is probably right ...
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Robert Atkinson Sent: 07 July 2009 14:07 To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] 1" 14 tpi UNS die Hi Dave, A 3/4" pipe thread die will also work. Both NPT and BSP are 14tpi and have approx 1" major diameter. Try taking your bit of pipe to a gas fitter. Clarke sell a multi-die kit for £35 inc VAT, http://www.machinemart.co.uk/shop/product/details/cht392-6-piece-pipe-thread ing-kit Regards, Robert G8RPI. --- On Tue, 7/7/09, David C. Partridge <[email protected]> wrote: > From: David C. Partridge <[email protected]> > Subject: Re: [time-nuts] 1" 14 tpi UNS die > To: "'Discussion of precise time and frequency measurement'" > <[email protected]> > Date: Tuesday, 7 July, 2009, 1:20 PM > Panasonic VIC-100 GPS antenna ... > > Dave > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] > On > Behalf Of Chuck Harris > Sent: 07 July 2009 13:07 > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] 1" 14 tpi UNS die > > I don't recognize the size you are asking for. What is your > application? > > -Chuck Harris > > David C. Partridge wrote: > > Does anyone (preferably in the UK) have 1.0-14UNS-2A > thread cutting > > die they would be prepared to lend me (preferably a > die nut type as I > > don't have a die stock)? > > > > Thanks > > David Partridge > > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
