Hi Dave, Check with your local "plumbing"-store. In Sweden the "old inch based pipe thread" lives on, slightly renamed. Se attached .jpg for approximate inside/outside diameters.
The pipes are sold in 6m lenghts threaded in both ends. Good luck in your search! -- Björn > Panasonic VIC-100 GPS antenna ... > > Dave > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Chuck Harris > Sent: 07 July 2009 13:07 > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] 1" 14 tpi UNS die > > I don't recognize the size you are asking for. What is your application? > > -Chuck Harris > > David C. Partridge wrote: >> Does anyone (preferably in the UK) have 1.0-14UNS-2A thread cutting >> die they would be prepared to lend me (preferably a die nut type as I >> don't have a die stock)? >> >> Thanks >> David Partridge >> >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >
<<attachment: pipe_dimentions.jpg>>
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
