>13) The default TC is way too slow, I've found 500 sec with a damping of 1.5 NOW works good for me. >Without the TLC modes, It is safest to leave it at its default of 100 sec and 1.2.
Here is a plot showing switching from a TC=100 to TC=400 Notice that the jumps in frequency which are more noticeable at TC=400, are probably caused by the 1 degree sensor in this tbolt. http://www.k5cm.com/z3801%20vs%20various.htm I will put up a plot showing the Tblot in hold over a little later. The short term in hold over looks better, but as you mention there is sometimes a large jump in frequency when it goes into hold over. Regards, Connie K5CM _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
