Hi Tim, IF you want to use NTP with the Tbolt, there is also the refclock_palisade, that was expanded a few years ago to also support Tbolts, besides the orginal palisad/acutime-line of Trimble receivers.
-- Björn > On 10/20/2009 10:58 AM, Mark Sims wrote: >> >> Heather will happily process any TSIP message that comes in over the >> serial port (whether she requested them or not). If they contain any >> info that can be displayed, then that info will go to the screen. No >> assumptions are made about packet timing, etc. Data gets processed >> and displayed as it comes in. >> ... > Thanks Mark. This is very useful information. >> There are couple dozen status messages that get requested (one each >> second). To get an idea of what they are check the source file >> heathgps.cpp Look for the routine request_misc_msg(). > Very clever method!! > > I will take a look at adapting gpsd to add some support for LH operation > or for a complete Linux port. Thanks for your help. > > Tim > N2LTQ > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
