Yup, you're in good shape. These are pretty straightforward devices. What firmware version do you have? Ver command.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Kahrs Sent: Thursday, October 29, 2009 12:25 PM To: Discussion of precise time and frequency measurement Subject: [time-nuts] Datum 2100L "issues" I'm finally trying to get this epay 2100L time server to go. First step was to talk to it, change the host number and then see what I had... It appears to me (or it, depending on who you ask), that two satellites are in view, to wit: 26 ? sig 09 0.0000000 04 17.6000004 10 0.0000000 15 0.0000000 01 0.0000000 07 0.0000000 28 0.0000000 02 9.8000002 27 ? sat Auto 2-D Sats: 4 2 Above 6.0 is considered "good". But, the status command reveals it is "freewheeling" --- clearly, since it is neither "tracking" or "locking". If I try and use the position command, I get this: 28 ? pos GPS Engine Busy:2 I can query the GPS software edition: 14 ? gpsversion Nav 8.8 4/1/0 Sig 10.16 4/1/0 So, any ideas? _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
