Suppose your 17 HVS having flat backup battery, once power up, by default, it goes to Garmin mode. You need to run the setup with: SNSRCFG http://www8.garmin.com/support/collection.jsp?product=010-00242-53 Reconfigure the 17 to NMEA mode
Chao, Pascal On 10/31/09, mike cook <[email protected]> wrote: > A stab in the dark. I don't have one of these. > > The doc I find says that these are supplied with a rechargable lithium cell > which enables back up of GPS data . It is supposed to last 10yrs, so if > yours is reaching retirement age it may have gone awol and dropped the > serial parameters to a state which your monitor is not set too. > So you could try all the baud rates listed in the specs. Use a terminal > emulator instead of the monitor program, which appears to be a graphic app, > to see if you getting any data output . > > default appears to be 9600,8 bit,no parity > > Serial Interfaces > a.. Port 1: True RS-232 output, asynchronous serial input compatible with > RS-232 or TTL voltage levels, RS-232 polarity > b.. Port 2: Asynchronous serial input only, compatible with RS-232 or TTL > voltage levels, RS-232 polarity > c.. Baud Rates > d.. 300/600/1200/2400/4800/9600/19200 > e.. > Serial Formats > a.. Port 1: Selectable between NMEA 0183 v2.00, NMEA 0183 v3.00, and > Garmin® binary formats; NMEA 0183 v2.0 (ASCII); Approved output sentences: > GPALM, GPGGA, GPGLL, GPGSA, GPGSV, GPRMC, GPVTG; Proprietary sentences: > PGRMB, PGRME, PGRMF, PGRMM, PGRMT, PGRMV > > ----- Original Message ----- > From: "Neville Michie" <[email protected]> > To: "Discussion of precise time and frequency measurement" > <[email protected]> > Sent: Saturday, October 31, 2009 9:15 AM > Subject: [time-nuts] Garmin GPS17 > > >> >> Hello all, >> I have a Garmin GPS17 HVS which is a GPS receiver/antenna in one unit. >> When I first bought it I used it to discipline an HP10811 OCXO. One day >> it stopped >> responding to its monitor program. >> I got a TBOLT which has kept me busy and now I want to compare it to the >> Garmin. >> >> Although I used to be able to run the monitor program and it does not >> respond any more, >> if you put it under the sky and power it up, after a while you get a PPS >> out of it that is >> in phase with the GPS. >> >> So there is somebody home but they have turned out the lights. >> >> The Garmin manuals mention failure to respond if you do the wrong thing, >> Can anyone help me get it going again? >> >> Cheers, >> Neville Michie >> >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
