John, Thanks for the effort. I have the info sheet. I am looking for a service manual ideally but likely will not find it though I thought I would ask.
Joe -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Allen Sent: Saturday, October 31, 2009 8:35 PM To: 'Discussion of precise time and frequency measurement' Subject: Re: [time-nuts] HP/Symmetricom 58535A and 58536A Hi Joe - I have the "Information Note" that comes with new 58535A units. I wish I could scan and email it, but no scanner right now. The most useful info is the specs - below. BW +/- 10 MHz -3 db Gain 0 +/- 3 db NF 5 db typ. VSWR 1.2 input typ. 1.6 typ output both at L1 Isolation -30 db at L1, -54 db 40 Mhz from L1 DC Power +4.5 to +13 VDC Current 23-48 ma depending on Voltage. AC Input level - Max -25 dbm, damage level +17 dbm at L1 (Mech and Env omitted) John -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of J. L. Trantham Sent: Saturday, October 31, 2009 6:27 PM To: [email protected] Subject: [time-nuts] HP/Symmetricom 58535A and 58536A Anyone with manuals or schematics for these units? Anyone with any experience repairing them? Thanks in advance. Joe _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
