One can just pump once with a mechanical pump and seal off with a flame or crimp tubulation. The pump could be driven by a waterwheel, steam or diesel engine, etc if you want to go totally non electrical. Sent via BlackBerry by AT&T
-----Original Message----- From: Bob Camp <[email protected]> Date: Sat, 9 Jan 2010 12:12:35 To: Discussion of precise time and frequency measurement<[email protected]> Subject: Re: [time-nuts] Non electrical time-nuttery Hi A pendulum in a vacuum clock is nothing to look down at. They are amazingly stable. Lots of machine work to build one from scratch, even if you use an off the shelf vacuum pump. Of course they are not purely mechanical. I'd hate to think about making a wind up vacuum pump .... If I remember correctly without the vacuum, pressure and pressure / temperature effects get to you pretty fast. Bob On Jan 9, 2010, at 2:07 PM, Lux, Jim (337C) wrote: > OK.. So we're moving back in electrical technology.... > But what about mechanical? Could modern technology get a substantial (>order > of magnitude) improvement over 19th century chronometers (either pendulum or > balance wheel or whatever). I know there's some really good quartz fiber > torsional spring schemes, but I think they still need electrical means to > keep them moving and to read it out. > > So how good can one do with a mechanical, hydraulic, (or chemical, I suppose) > system? Let's assume it has to have a "direct" readout that is human > readable by a causal bystander. (this starts to sound like the 10,000 year > clock or whatever it is..) >_______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
