An
easy way to see the 10 microsecond pulse
On the
Tbolt is to use a pulse stretcher. I
Used this
circuit on the 25 microsecond wide
Pulse on
the HP Z3801 to add a true 1 second
pulse
indication to the front panel and also
output
the pulse through a 51 ohm resistor to
a BNC
on the back panel. Reducing the value
of the
1 megohm resistor and/or the .47 mfd
capacitor
will shorten the output pulsewidth
and
these values aren’t critical.
schematic - http://farm3.static.flickr.com/2679/4351301462_7cd9625a97.jpg
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
