Lux, Jim (337C) wrote:
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf
Of Bob Camp
Sent: Wednesday, February 17, 2010 4:24 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] DMTD to MMTD
Hi
No Windows 7 driver signing issues with a serial port. USB can be a bit of a
tangle that way, not as
easy as it used to be.
Bob
That's what's nice about IP over Ethernet... hang it on the network, any
machine can see it.
If you want unbroken measurement series you want to ensure isolation
such that you get the capacity for sure and not statistically. All of a
sudden you have opened up a new bag of issues and configuration
problems. It can be handy, but for continuous measurements isolation and
well understood failure mechanisms is what you want.
Ethernet/IP can be handy, but it is not a universally good tool.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
