Mark,
Arthur Dent wrote in this list a couple of months ago:
"The display is a HY-2002A-803 http://www.ciahk.net/upload/docs/HY-2002A.pdf";
I'm going to include that info on my page.
Also Christian Vogel told me today:
"I'm fairly sure that testpad P5 will be connected to AtTiny26 pin 10
(\RESET), because that's also used for programming. If that's indeed
the case you'll be able to reprogram that tiny chip via standard AVR
means."
He is right, so I'll update the schematic and publish it in the next hours.
Thank you all for the feedback.
And if somebody wants to upload the info on my page into any widely used info
page, feel free to do it without asking.
Best regards
Ignacio Cembreros
-----------------------------------------------
Mark Sims wrote:
Any idea what LCD controller chip the display uses? Probably the Hitachi standard interface, but different controller chips can have subtle differences...
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/210850553/direct/01/
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
