Link does not seem to work ?? 73, Dick, W1KSZ
-----Original Message----- >From: EB4APL <[email protected]> >Sent: Mar 19, 2010 7:47 PM >To: Discussion of precise time and frequency measurement <[email protected]> >Subject: Re: [time-nuts] Fluke1 Monitor > >Mark, > >Arthur Dent wrote in this list a couple of months ago: > >"The display is a HY-2002A-803 >http://www.ciahk.net/upload/docs/HY-2002A.pdf"; > >I'm going to include that info on my page. > >Also Christian Vogel told me today: > >"I'm fairly sure that testpad P5 will be connected to AtTiny26 pin 10 >(\RESET), because that's also used for programming. If that's indeed >the case you'll be able to reprogram that tiny chip via standard AVR >means." > >He is right, so I'll update the schematic and publish it in the next hours. > >Thank you all for the feedback. > >And if somebody wants to upload the info on my page into any widely used info >page, feel free to do it without asking. > >Best regards >Ignacio Cembreros > > >----------------------------------------------- >Mark Sims wrote: > >> Any idea what LCD controller chip the display uses? Probably the Hitachi >> standard interface, but different controller chips can have subtle >> differences... >> _________________________________________________________________ >> Hotmail: Trusted email with powerful SPAM protection. >> http://clk.atdmt.com/GBL/go/210850553/direct/01/ >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> >> > > >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
