Steve Rooke wrote:
So there are 250 clocks, presumably, spread around the World and owned
by the member countries of the BIPM.
There is a fair spread geographically, yes. See map:
http://www.bipm.org/en/scientific/tai/tai.html
Their time is somehow compared centrally and an "absolute" time is determined
from them.
They are compared by various methods in a network style of operation.
The sites are compared against each other and the clocks of each site is
compared against the clock driving the network comparison. Hence,
through these steps phase differences can be cranked out.
http://www.bipm.org/en/scientific/tai/clock_comparisons.html
Equipment calibrations:
http://www.bipm.org/jsp/en/TimeCalibrations.jsp
Each clock will then have a delta to apply to it's own time to provide the BIPM
"absolute" time which then allows each member country to use its own
clock for timing.
Yes, out comes the delta of each individual clock as well as the
individual labs. These are reported upon regularly to be found in BIPM
circular T:
http://www.bipm.org/jsp/en/kcdb_data.jsp
ftp://ftp2.bipm.org/pub/tai/publication/cirt.266
Useful resource:
http://www.bipm.org/jsp/en/TimeFtp.jsp?TypePub=publication
This sounds like a logistic and bureaucratic nightmare, I will have
to look further as to how this is achieved. Any pointers gratefully
accepted.
I hope the above pointers get you started.
They have spent some time cooking this up, yes.
Toss into that, we have not really spoken too much about how they
process things. I can't tell you too much about it, except that I know
that their tool is called ALGOS. If someone could give me the
appropriate articles I would be greatful.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.