PS The antenna schematics and photos are on TVB's site as Dan suggested.... _http://www.leapsecond.com/museum/10509a/_ (http://www.leapsecond.com/museum/10509a/) These are much better quality than those in the HP manual so well worth getting both. regards Nigel GM8PZR In a message dated 01/05/2010 11:11:25 GMT Daylight Time, [email protected] writes:
Paul, to get these to work, you will need the loop antenna. This has, in the early versions at least, a Nuvistor amplifier in it with a crystal filter built in to it. I think there was a later version that had transistors. I have seen the schematic somewhere, have you tried TvB's site? Hi Dan and Paul The ops and service manual is available from the Agilent site........ _http://cp.literature.agilent.com/litweb/pdf/00117-9029.pdf_ (http://cp.literature.agilent.com/litweb/pdf/00117-9029.pdf) Although not the best pdf manual ever it does contain the schematics, including both antennas, and should be usable. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
