Changed it to a different part that is available. Difference is RHoS compliance method.
Changed the backordered 2n3906 as well. Shaved $0.02 off the total cost! Bob On Fri, Jul 2, 2010 at 3:17 PM, Bob Camp <[email protected]> wrote: > Hi > > It looks like it may be a while before the trim pots come in (12 weeks...). > The 3266X (side adjust rather than top adjust) is in stock. I'm not sure if > the layout is "side adjust" friendly or not. > > Bob > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Bob Bownes > Sent: Friday, July 02, 2010 2:54 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Pic programing for the PICTIC II > > Folks, > > I put together a mouser 'project' with all of the parts. This means > you can just go to the mouser site and order all the parts for the > project. No need for anyone to do a group buy of parts, re-pack and > re-distribute them. Here's how to get to it: > > To access the project, click on the url listed below or copy and paste > it into your web browser: > > http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c7ada9ced0 > > Or you can access the project by going to http://www.mouser.com/ and > click on the EZ Buy option on the top navigation bar. You can also > click on this link or copy and paste it into your browser: > http://www.mouser.com/Tools/Tools.aspx. Then enter the following > access number listed below into the Project Access ID function. > > c7ada9ced0 > > > Total cost w/o shipping is $30.30. > > > On Fri, Jul 2, 2010 at 1:23 PM, Peter Vince <[email protected]> wrote: >> Apologies for the previous incomplete message - somehow my laptop >> trackpad jumped the cursor over the send button :-( >> >>> Better ? >>> How many16f688s are we talking here? >>> >>> My thinking is less than 10 as only two people have asked. >>> Don't know how many have not asked. >> >> I would also like a pre-programmed PIC please, if someone can arrange >> that. Or ideally, a complete kit of parts, but as the previous >> correspondent has written, I appreciate that is a lot of work. >> >> Thanks, >> >> Peter Vince (London, England) >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
