A few preliminary measurements here (I'm working on getting some software support together): http://www.ke5fx.com/pictic.htm
-- john, KE5FX > -----Original Message----- > From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]on > Behalf Of Stanley Reynolds > Sent: Saturday, August 14, 2010 7:12 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] PicTic Data > > > > > My guess as to what the data may indicate is performance of the > 10 Mhz 20PPM > PICTIC internal oscillator, need to repeat test with precision > 10Mhz and auto > calibrate off. Fatness of the line/width maybe PICTIC error. Note > graph seems to > show me leaving the room and returning via the outside door. Not > sure what the > ~100 sec oscillations are, need to check a/c cycle time. > > Stanley > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
