Gents,
Wrote <I have several Lucent rubidiums that seem to be .02 Hz off at 15 MHz
compared to the 15 MHz Lucent GPS. Does anyone know how to either phase lock
it to a GPS of install something like a 20 turn pot to adjust the control pin
frequency so an exact match may be achieved?
Reply< Depends on which one you have but the one with heat sink fins on the
front has a adjustment pot under a screw on the front appears as a break in the
3rd fin from the left. Don't know about the gold color case one's.
The units I have are ones with a faceplate that has both 10 and 15 MHz outputs
plus some status lites on the RH side.
I can’t find any obvious adjustments. Sigh….
Regards,
Perrier
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
