I will bet 1 or 2 of those are quite a costs. On Wed, Dec 22, 2010 at 6:10 AM, Robert Lutwak <rlut...@gmail.com> wrote:
> http://www.wenzel.com/pdffiles1/Dividers/LNFDN.pdf > > -RL > --- > > -------------------------------------------------- > From: "Tom Van Baak" <t...@leapsecond.com> > Sent: Tuesday, December 21, 2010 10:03 PM > To: "Discussion of precise time and frequency measurement" < > time-nuts@febo.com> > Subject: [time-nuts] Question on GPS and reference standards > > > A good question for the group... >> /tvb >> >> Hi: >>> >>> I have both a GPS Frequency standard (Trimble Thunder Bolt) which outputs >>> the 10 >>> MHz reference and also the 1 PPS signal. In addition, I have a Collins >>> AEU unit >>> which has a 10 MHz Rubidium reference inside. Both units work well and >>> produce a >>> very accurate reference signal for the units that require a 10 MHz >>> reference. >>> >>> The challenge is that I am looking for a source of a 10:1 frequency >>> divider so I >>> can create a 1 MHz reference for my Rockwell Collins HF-80 system. Can >>> you >>> suggest a source of a high quality frequency divider that outputs a >>> (nearly) >>> sine wave signal? We only need two units - one for production and one for >>> our >>> development lab. >>> >>> The object is to provide a very accurate source of 1 MHz and 10 MHz to >>> the >>> various radio systems used in our disaster and humanitarian relief radio >>> network. When you send data, you need to be exactly on frequency. >>> >>> Any help would be great. Just need to be pointed in the right direction. >>> While >>> we could try to design something to meet this objective, I am sure that >>> someone >>> has already done this. >>> >>> Thank you. >>> >>> Kevin >>> >> >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
