In message <ed447133-9087-4270-b320-74b602774...@jks.com>, John Seamons writes:
>Yes, then there are the timing issues. When I first ran the code, >and printed every instruction executed, it was clear after a while >that a timing loop was running. Now whether this delay is critical >to a measurement function or not is unknown to me. Now, when I said "not critical" it was in the context of using a different processor, not of controlling the hardware via registered mail... :-) The USB link you use is adding a lot more latency than a directly attached microcontroller would suffer. Those of you wanting to look at the firmware can use the "PyRevEng" project I have made on github. You just need a HP5370B rom image (google is your friend, if your memory fails you) and a python runtime and you're all set. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 p...@freebsd.org | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.