Done it before: yes Done it in the last 2 years: yes Setup to do it in the basement: yes, I use soldering iron and/or hot air and have a USB inspection microscope Would I byt one? Yes Yes Yes I'm always on the lookout for more complex kits Would do in a reasonable amount of time: Yes
I've done multiple projects of my own with FPGAs in TQFP208 packages. I've actually come to prefer SMD over through hole in most cases. Current complex project I'm working on is a spectrum analyzer: http://www.scottyspectrumanalyzer.com/ Scott > > > > Done it in the before - yes. > > > > Done it in the basement / last 2 years - no. > > > > Set up to do it in the basement - yes, but not set up well. > > > > Would I buy one - done that before. Likely would again. (counts as a yes). > > > > Would actually do it in a reasonable amount of time - unlikely. (That > counts as a no). > > > > Any more votes? > > > > > > Bob > > > > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.