> As for the measured cable length, do I include the BNC connectors or not?
You want the difference in path lengths. Is there an asymmetry in the setup? If so, count the BNC connectors that don't have a match on the other path. If you have input-Tee-coax-Tee-terminator, then the difference is the coax plus half of each Tee. That is you want to measure the length from center of Tee to center of Tee. If you have a splitter, then the length is the difference in coax lengths. (assuming everything else is symmetric) -- These are my opinions, not necessarily my employer's. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
