should work just fine as long as the connectors a good fit. Suspect it is. On Sat, Apr 9, 2011 at 7:51 PM, Mike S <[email protected]> wrote:
> At 06:53 PM 4/9/2011, Joseph Gray wrote... > > I have an old Arcnet hub that I want to salvage the isolated BNC >> connectors from. Arcnet used 93 Ohm coax. I know that there are 50 Ohm >> and 75 Ohm versions of BNC connectors, but the ones from the hub look >> like a 50 Ohm BNC to me. >> > > The ARCNET spec states: "The MIC for use with coaxial cable is a > conventional BNC per MIL-STD-348A." If you look at that spec, it's for 50 > Ohm connectors. 75 Ohm ones don't have the insulator around the center > socket. Since ARCNET only ran at 2.5 MHz, the mismatch apparently didn't > matter. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
