On 04/10/2011 01:51 AM, Mike S wrote:
At 06:53 PM 4/9/2011, Joseph Gray wrote...
I have an old Arcnet hub that I want to salvage the isolated BNC
connectors from. Arcnet used 93 Ohm coax. I know that there are 50 Ohm
and 75 Ohm versions of BNC connectors, but the ones from the hub look
like a 50 Ohm BNC to me.
The ARCNET spec states: "The MIC for use with coaxial cable is a
conventional BNC per MIL-STD-348A." If you look at that spec, it's for
50 Ohm connectors. 75 Ohm ones don't have the insulator around the
center socket. Since ARCNET only ran at 2.5 MHz, the mismatch apparently
didn't matter.
Risetime is the key aspect. If the impedance missmatch is sufficiently
small compared to the rise-time, it has no significant effect.
As I recall it ARCNET wasn't running at very high speeds and hence no
need for short rise-times.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
